The Whirlpool Cabrio Washer F1 error happens when the electronic control board detects an out of range pressure signal. There is really not much troubleshooting involved with the F1 error, so just do the following: Check the water pressure switch hose at the main control board and make sure its connected properly.
Why does my Whirlpool Cabrio say F1?
Usually, it’s a problem with the control board. By replacing the control board, you should be able to fix the problem. However, it might also be a problem with the hose, something might be stuck in the hose.
How do I fix E1 error on my Whirlpool washer?
Possible Solutions
Check that the water faucets are not closed.Check that the water pressure in the house is over 20 kPa.Clean the inlet hose filter screens. Be careful not to remove or disturb the screen placement.Check that the drain hose is not below 27½” (700 mm) from the floor.
What does F1 on a Whirlpool stove mean?
F1 – Control Board Failure – Replace control board (clock). F2 – Oven Temperature Is Too High – Check for welded contacts on bake and broil relays. If present, replace control board (clock).
What is the meaning of F1 in washing machine?
The F1 fault code on this washer indicates that the water level pressure transducer signal is out of range. The pressure transducer air hose tubing being pinched or crimped can cause this. A failed pressure transducer on the machine control board can also cause it.
How do I fix F1 error on Whirlpool oven?
F1 Error Code
There may be an analog to digital failure; if this is the case, simply disconnect the range for 30 seconds and plug back in. If the same display reappears, you may need to replace the control board.
What does F1 mean on a Whirlpool Duet washer?
The F01 error on this model washer means the relay for the drain pump motor on the main control board (CCU) has failed to activate or a communication error between the Central Control Unit (CCU) and the EEPROM onboard the CCU occurred.
What is the meaning of F1 in AC?
Some air conditioners use an E1 or F1 error as an ambient room temperature error. This means that the temperature sensor may not be working correctly. Some other AC systems use an F1 error to signal that the indoor and outdoor systems are unable to communicate with each other.
What does F mean on a boiler?
The Ideal boiler error code F is a common fault, displayed when your boiler has low water pressure. This is luckily an easy problem to fix yourself.
Why is my washing machine showing E1?
When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water. If problem persists, contact our Samsung Call Centre for further assistance.
What does code E1 mean on Whirlpool washer?
A Whirlpool washer E1 or F9 error code (FP with some models) means that the washer is taking too long to drain (typically, over 8 minutes).
What does E1 and F3 mean on a Cabrio washer?
F3 E1 error code Whirlpool washer appears on the screen when the control board cannot detect the water level to continue the program. Having appeared once, this signal constantly appears after the washing machine is turned on and sometimes blocks it during operation.
