Use coarse-thread drywall screws for most wood studs. Coarse-thread drywall screws work best for most applications involving drywall and wood studs. The wide threads are good at gripping into the wood and pulling the drywall against the studs.
How long should screws be for studs?
The screw should be a #8 or #10 size screw and penetrate the wall stud at least 1″ to 1.5″. Make sure to accommodate the thickness of the wall covering such as 1/2″ drywall when selecting the screw length.
Our inspectors have seen a disturbing trend of late: people using wood or deck screws when building structural elements. The only kind of screws that are acceptable are specialized screws, such as the Simpson brand joist hanger screws, for use in the Simpson joist hanger systems.
Are nails or screws better for framing?
Nails are often preferred for structural joining, including framing walls, because they are more flexible under pressure, whereas screws can snap. Nails are also called upon when securing plywood sheathing for exterior walls, installing hardwood floors, and attaching siding and roofing.
Because wood is relatively weak perpendicular to its grain, screws don’t hold that well when screwed into the end grain. Wood screws do, however, hold extremely well in cross grain. So the trick to making screws really hold in the end of a piece of wood is to give them a bit of cross-grained wood to bite into.
How do you know what size wood screw to use?
The most important factor in screw selection is length. The general rule of thumb is that the screw should enter at least half the thickness of the bottom material, e.g. 3/4″ into a 2 x 4. The other factor is the screw’s diameter, or gauge. Screws come in gauges 2 through 16.
Why are screws not used for framing?
Nails have tremendous strength in shear, but are subject to pull-out. This is why nails are never used where subject to withdrawal forces, like a deck ledger. Screw are very resistant to pull-out, but are weak in shear. So no, we would not frame a house with deck or drywall screws.
3 Common Screw Types at a Glance – Machine, Sheet Metal, and Cap Screws.
