Answer: Soft (pending) trouble codes The short answer is yes. Your vehicle can pass the smog check with a pending trouble code, so long as the check engine light is not illuminated and the required emission monitors are ready.
Can you tell if a code has been cleared on a car?
When codes are cleared all vehicle emissions tests are reset and will display a status of ‘not complete’. In order to update the test status the vehicle must be driven under different conditions (town, highway, etc) so that the ECM may gather sufficient data to determine whether the tests have passed or failed.
How many miles do you have to drive to clear a check engine light?
So why is the light still on? Here’s something you probably don’t know: after clearing the car’s computer you will need to drive for about 50 to 100 miles. As you drive your car the computer will monitor all the sensors and register the results.
Will a permanent code clear itself?
Permanent Diagnostic Trouble Codes (PDTCs) are very similar to regular Diagnostic Trouble Codes (DTCs). However, unlike regular DTCs, they cannot be reset by disconnecting the vehicle’s battery or cleared using an On-Board Diagnostic (OBD) scan tool.
How long does it take for a permanent code to clear?
The whole drive cycle must take at least 10 minutes. After performing a Universal Trip Drive Pattern, the computer clears the code, since it’s “seen” that the problem is fixed and not reoccurring.
What does clearing fault codes do?
When a code clears, you know that the vehicle has been restored to good working order. However, there could be occasions when clearing the codes manually is part of the repair process. For example, a check engine light can be triggered when the gas cap isn’t tightened correctly.
Will check engine light go off after tightening gas cap?
The check engine light should go off after you drive for several minutes if the light was caused by a loose gas cap. Pay attention to the dashboard after the check engine light experience. If you find that the light keeps coming on, and goes off again once you tighten the gas cap, then your gas cap is too loose.
How long will check engine light stay on after tightening gas cap?
As soon as it’s safe, pull over and make sure your gas cap is tight. Once you’re back on the road, your check engine light should go off within 10 or 20 miles.
What does PD mean after an engine code?
it stands for power control module. It’s your vehicles main computer.
What does a permanent check engine code mean?
Permanent codes are a special type introduced more recently which can not be cleared using a scan tool. If you have a permanent code the vehicle will clear it itself once the cause has been addressed and sufficient data has been gathered by driving under different conditions (idling, stop and go, highway)
