Varathane® Classic Oil-Based Penetrating Wood Stains are formulated with a unique base for deep penetration and premium pigments for clear color. This results in a deeper, richer and more natural color for your wood projects.
How long does it take for varathane classic penetrating wood stain to dry?
Dries to the touch in 1-2 hours, dries to handle in 2 hours and can be recoated in 2 hours. Allow Varathane Classic Wood Stains to dry for 8 hours when applying an oil-based finish or 24 hours before applying a water-based finish.
Does varathane stain need a top coat?
Allow stain to dry a minimum of 2 hours and then re-coat if additional color is desired. Allow a minimum 2 hours dry time between each gel stain coat. Varathane Premium Gel Stains must be topcoated for protection. Allow stain to dry a minimum of 8 hours before top coating.
Is varathane the same as Minwax?
Are Minwax and Varathane the same? No, Minwax wood stains and Varathane wood stains are two different brands that make wood finish products. However, they are the top two brands in this market, and they have the broadest range of products.
Which is better oil based or water based stain?
If the wood is going to be in direct exposure to wind, rain, and sunlight, an oil-based stain is the best choice. This is because it is more durable than a water-base and will provide a more complete protective layer against these elements.
Is varathane classic stain water based?
Bring out the beauty of natural wood with fast-drying, low odor and low VOC Varathane® Water Based Wood Stain. This high-quality stain features advanced pigments what enhance the natural beauty of wood with rich, natural color.
Does varathane wood stain need to be sealed?
Finish the wood with a clear top coat to protect it from damage. After the new stain has finished drying, seal it in. Polyurethane and lacquer are both water-resistant and good for finishing unsealed wood surfaces.
How do you dilute varathane wood stain?
How to Thin Stain
Step 1: Add Stain. Stir the stain to mix in any pigments that sunk to the bottom of the can, then pour an appropriate amount of stain into a spare container. Step 2: Add Mineral Spirits. Then add a measured amount of mineral spirits. Step 3: Test Stain. Grab some scrap wood, and test the thinned stain.
Can you use varathane Classic outside?
Varathane is the Rustoleum Company’s brand name for its line of interior and exterior stains and clear finishes. When using it for an outdoor project such as a fence, you need a product that blocks sunlight while it protects the wood. Spar Varnish is the best choice from the Varathane line.
Can you put varathane over stain?
Things You’ll Need
Varathane is applied over the wood with a paintbrush, just like any other type of stain is applied. After it has dried, it is possible to apply another coat of stain over the Varathane. While it is not common to add stain over Varathane, it can easily be done when necessary.
