Diablo’s TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials. These new blades deliver maximum performance and highest quality of finish; making it a ‘must-have’ tool for both professionals and DIYers planning composite decking projects.
Is the Trex saw blade worth it?
If the quality of cut and appearance of the end grain on your composite material matters to you or your customer, then this blade from Diablo is worth the every penny, but if you intend to do general cutting and aren’t overly concerned about swirl marks on the end grain, there are less expensive options available.
Do you need a special blade to cut Trex decking?
Yes, you can cut most composite decking just like wood — no special tools required.
What saw blade for composite decking?
What is the Best Saw Blade for Cutting Composite Decking? The EnviroBuild installation guide advises the use of a circular saw using a 40 tooth alternate top bevel finish blade to cut your composite decking boards.
What is a 40 tooth saw blade used for?
Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
Can you cut Trex decking with a circular saw?
How to Cut & Fasten Composite Decking. You can make simple cross cuts in composite decking the same way you would cut any soft pine—a power circular saw will work fine. A power miter saw can provide very accurate, straight cuts, and a table saw with support extensions can make all types of cutting easier.
What saw is best for cutting decking?
A circular saw is often used for most cuts, making it the best saw for deck building. Get one that cuts reliably, and equip it with a sharp carbide-tipped blade.
Can you cut Trex decking with a hand saw?
Like wood, you can use a conventional hand saw to cut composites. But it’s not efficient and will take a lot of time. You also need to make sure that it’s sharp.
What is best for cutting composite decking?
Mark the composite deck pieces to eliminate the need to guess where you should cut. You may use any conventional wood saw, but make sure that it’s sharp and well-maintained. We recommend a medium-tooth saw blade, whether you’re using a miter saw or a circular saw.
Can you cut composite decking with a wood blade?
In general, most types of blades will work for composite decking. But if you want faster cutting, you may use saw blades with medium to high teeth count. The more the teeth, the more accurate and smooth the cuts are.
