Toilets have many standard measurements, including height, width and depth or length. The width is 15 inches, height is just over 18 inches and the depth is 18.9 inches. The toilet tank is typically 10 inches wide (from the front to the back) and around 26 inches wide.
How do you measure toilet tank size?
A toilet tank’s height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.
Do all toilet tanks fit all bowls?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.
Do all toilets fit the same?
If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance. Toilets designed for a 10-inch rough-in measurement are relatively common.
How tall is a toilet tank?
The newest and most popular comfort height is typically around 16 1/8” floor to rim. The standard ADA (Americans with Disabilities Act) height toilets must have, a 17”-19” floor to bowl rim height, including the seat. You should also consider the toilet rough-in from the wall, which is commonly 12”.
How much space do you need between toilet and vanity?
A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″. If you’re placing your toilet in a compartment, it should be 36″ x 66″, although codes will allow 30″ x 60″.
How do I know if my toilet is a 10 or 12 rough?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
Can toilet tanks be interchanged?
It is unlikely that tanks will be interchangeable if you replace a toilet tank with one from a different manufacturer. Problems with mismatched tanks and bowls include hardware not lining up and poor balance on the bowl. Even if the bolts line up, the new tank may leak or be wobbly.
Can I buy just a toilet tank?
Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.
Can you mix toilet tanks and bowls?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
How do I choose a toilet tank?
When choosing a tank, you’ll have to consider the size of the flush valve and the positioning of the flush lever as well as the flushing system. The flush valve, which is located at the center of the tank, is activated by the flush lever and releases the water held in the tank.
Are toilet tank bolts universal?
Are Toilet Tank Bolts Sizes Standard? Toilet tank bolts help to seal your toilet tank such that it does not leak. They are durable and often in the same sizes and lengths. More often, toilet tank bolts are standard and will fit most types of toilet tanks.
Can I install a toilet myself?
When to DIY
If you’re an experienced DIYer with plumbing knowledge and the required tools, installing a toilet yourself may be a great option. Not only will you save money, but you’ll have the satisfaction of completing the toilet installation yourself.
What is better a 1 piece or 2 piece toilet?
One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.
Can you replace a 10-inch rough-in toilet with a 12-inch rough-in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
