SSL – Structural Slab Level – the level at the top of the concrete slab.
What is FFL level?
Finished floor level (FFL) refers to the uppermost surface of a floor once construction has been completed but before any finishes have been applied.
How do you get a finished floor level?
Locate the structural floor height specified in the flooring project plans. Add the combined height of the architectural floor material, substrates and adhesives to the structural floor height. This is the finished floor level.
What is slab level?
The term ‘floor slab’ usually refers to a floor that has been formed using concrete (and generally steel reinforcement) and may form part of the structure of a building. It may form the floor of a basement, at ground level or at upper levels.
What is NTS in architecture?
NTS – Not To Scale. Anything drawn with a “NTS” next to it means that whatever you do, you should not get a physical scale out to measure anything.
What is finished level?
Finished levels mean liveable levels, which to be specific are floors of a building that are developed with walls (specifically studs, insulation and drywall), separate rooms (if necessary), adequate ceiling height, electricity, flooring, and are heated areas for all four seasons.
What is finished ground level?
finished ground level means the ground surface of the site after all construction, leveling, grading, and development has been completed.
What is sill level?
Sill level or Window Sill level:-
The level between the base portion of the window and portion of the floor above ground level (upwards) is called Sill level. Mortar bed or concrete bed is laid at the base of the window.
What does floor level mean?
Floor Level means the floor upon which people normally walk—not shelves, ledges, overhead beams, tops of stacked materials, surfaces of equipment, or similar places.
How do I level a floor?
Remove the Existing Floor
Remove the Existing Floor. Check the Level of the Subfloor. Repair High Spots in a Wood Subfloor and Clean It. Repair High Spots in a Concrete Subfloor and Clean It. Repair Low Spots in Wood or Concrete Floors and Clean Them. How to Level a Floor for Installing Laminate.
What are the 3 types of foundations?
Foundation types vary, but likely your house or home’s addition does or will have one of these three foundations: full or daylight basement, crawlspace, or concrete slab-on-grade.
How do I know if my concrete slab is level?
You want to measure any gaps between the surface and the level. And if it’s less than 1/8 of an inch, it’s considered level. Larger gaps will require more pouring or some other type of adjustment. Mark these areas with a felt-tipped marker, and repeat the process until the entire area has been measured.
Does NTS mean not to scale?
Some drawings (such as isometric drawings) are Not To Scale (NTS). You can still count the points and specify the length for measurements on NTS drawings. The first step is to identify the drawing as NTS.
What does Gyp mean in construction?
It is a mixture of gypsum plaster, Portland cement, and sand. The brand name Gyp-Crete, a Maxxon Corporation trademark, has come into general use as a term for gypsum concrete by construction professionals and architects.
What AFF mean?
Affirmative. Another common definition of AFF is “affirmative.” Originally a term used in radio conversations to mean “yes,” AFF is now widely used in text-based communications to indicate agreement or consent.
