Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters or side cutters or Nippy cutter) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything).
What are side cutters used for?
Side cutters are used on wire and the leads of electronic components, as well as to strip insulation. Stripping refers to safely removing the outer layer without damaging the conductors underneath. If they do get nicked, the connection may break or it could cause an electrical short circuit.
What is the difference between side cutters and diagonal cutters?
Diagonal cutters cut straight through the material leaving a flush-cut while side cutters leave a sharp end. This makes dikes more suitable for cutting jewelry because they do not leave sharp ends. Sharp wire ends on jewelry can be injurious.
Are side cutters the same as wire cutters?
Answer: The term “flush” means level or straight and on the same plane, so flush cutters cut a wire level. Side cutters, or angle cutters, cut on an angle, meaning the wire edge will be cut to one side.
What is the use of long nose pliers?
Long-nose pliers
Long-nose or needle-nose pliers are ideal for working in tight spaces and are ideal for a wide range of tasks, from jewellery work to cutting small-gauge wire. They feature long, slender jaws with a pointed tip which makes it easy for the pliers to reach small spaces.
What do electricians use side cutters for?
Proper use of side cutting (lineman’s) pliers: Many applications including electrical, communications and construction work. Use to grip, splice or cut wires, and strip insulation.
Can diagonal pliers cut wire?
Diagonal cutting pliers are used for cutting wire. They cut wire by indenting and wedging a cable apart (as opposed to shearing like scissors).
How thick can a wire cutter cut?
This product can reliably cut steel wires measured up to 4mm thick. This thick wire cutter has your back, whether it be clipping solid cables, stranded wires, or even fencing wires.
What can diagonal pliers cut?
Diagonal cutting pliers are used for cutting wires, screws and nails. They are known by many different names: side cutting pliers, side cutters, nippers and wire cutters, to name but a few! They are called diagonal cutting pliers because the cutting blades are at an angle to the handles.
Are pliers the same as wire cutters?
Remember that wire strippers are best for removing the insulation from wire, while cutters are best for (you guessed it) cutting wire. Pliers help you reach, bend, grab, cut, hold and loop wire, and crimpers are the best tool to join two pieces of ductile material together.
What is the best tool to cut wire?
The Best Wire Cutter
Our pick. Channellock E337CB Diagonal Cutting Plier. Strong cuts, comfy grips. Budget pick. Irwin Vise-Grip 2078307 7-Inch Diagonal Cutting Pliers. Quality at a bargain. Also great. Bahco 2101G-160 Ergo Cutting Pliers. Great features, not as strong. Also great. Klein 11054 Wire Stripper-Cutter.
Can wire cutters cut through metal?
For the most basic application of cutting cables, you can use the wire cutters to cut copper, brass, aluminium, iron and steel wire. To protect you from being shocked by the electric cables you are working with; some wire cutters have insulated handles.
Do pliers have wire cutters?
A plier-like tool designed for cutting wires is often called diagonal pliers. Some pliers for electrical work are fitted with wire-cutter blades either built into the jaws or on the handles just below the pivot.
Do pliers cut metal?
JEWEL TOOL 5 Inch Heavy Duty Side Cutter Pliers For Metal Work – TP1013A-5 Product Description: These Pliers Will Cut Through Wire, Metal Sheeting, And More.
What are linesman pliers used for?
Lineman’s pliers are used by electricians to straighten, cut, grip, twist, push, and pull wire. They are used to cut and bend light gauge metal and pull staples and nails. The angular edges on the outside edge of the jaws are designed to ream down ridges and burs on the inside lip of cut pipes.
