We recommend adding between 3” to 6” to your width measurement. Also add 2 ½” to your height measurement to allow enough room for the mounting brackets above the opening. Our suggested floor clearance is ½” to 1”. At least 2” of flat space is required to outside mount verticals.
How low should vertical blinds hang?
Vertical blinds should be mounted about 3 inches above the window opening. The vanes should not touch the floor and must fall just short of the floor. Unlike shades, height is very important for vertical blinds. For most shades, any extra will not be too noticeable (as the extra fabric will stack or stay in the roll).
How high should vertical blinds be?
The standard height is 72 inches, or 6 feet, which may not be long enough for all sliding glass doors, as these are usually a standard 80 inches tall. As for the width, vertical blinds are available in widths anywhere from 24 to 72 inches out of the box.
How far should vertical blinds be off window sill?
If you are installing the vertical blind above a windowsill, 3 cm from the bottom will usually be sufficient, but this is a matter of taste. You also need to be sure that the slats can keep out sunlight, if the sill at the bottom of the window is low.
How long should vertical blinds be for Windows?
When measuring for outside mount blinds, add at least 4 inches to every side of the window to make sure your room is private and that the blinds block enough light. The most common standard vertical blind sizes that you can buy quick ship or off-the-shelf range from 24-inch x 72-inch to 72-inch x 72-inch.
How much smaller should blinds be than the window?
Not Adding Width To Outside Mount Blinds
We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
How much space do vertical blinds take up when open?
We recommend 3″ on each side (6″ total overlap) for optimum light control and privacy. If you want the entire window uncovered when the blind is fully open, you may need to add more than the recommended 6″.
Can you put perfect fit blinds on sliding patio doors?
Perfect fit blinds for patio doors
Because perfect fit blinds are installed within your window frame, they give you complete flexibility, no matter how wide your windows are. If you choose perfect fit you can have a huge range of different styles including roller, roman, or venetian blinds for your sliding patio doors.
How wide are vertical blind slats?
The most common slat sizes are 35 millimetres, 50 millimetres and 64 millimetres. However, some blinds feature larger slats — running to more than 127mm slat widths. Use a tape measure or consult your order history to find the width of your vertical blinds slats.
Are blinds supposed to touch the window sill?
Yes, for your blinds to work to greatest effect and to achieve the right visual finish, window blinds should rest on the windowsill. The only exception to this is vertical blinds which require a small amount of clearance to prevent the louvres from dragging on the windowsill when operated.
Should blinds sit on window sill?
When the blinds are closed, they should be resting on a window sill or ledge. If you don’t have a window sill, you should measure the length to the point where you want the blinds to reach, which is usually the bottom of the window or door opening.
Is it OK if blinds are too long?
Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.
How much space do you need on each side of blinds?
To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top and the bottom by at least 3″.
Can you hang blinds outside window frame?
When Should You Install Blinds with an Outside Mount? An outside mount is recommended when window frames are too shallow for mounting hardware to be installed, or when there are obstructions like window cranks, security sensors, tile or trim that prevent your treatments from lowering all the way.
