The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Slowly depress the accelerator pedal all the way to the floor. Slowly release the accelerator pedal until it is all the way back up at the rest position. Turn the ignition key to “OFF” position.
What does red lightning bolt on dashboard mean?
The lightning bolt warning light alerts you to a fault in the electronic throttle control system in your vehicle. This may be a faulty throttle body, the throttle body sensor or possibly the throttle body control motor which is what controls the opening and closing of the throttle body as the motor requires more fuel.
How do you reset the electronic throttle control system on a Chrysler 300?
Registered
Insert ignition key and turn to “ON” (not start).Wait for all idiot lights to go out. Slowly depress the accelerator pedal all the way to the floor.Slowly release the accelerator pedal until it’s all the way back up.Turn the ignition key to “OFF”.Start the engine.
How do I fix my electronic throttle control light?
solution: stop driving your vehicle and have it towed to your mechanic. there, the first step will be to scan the engine computer for a trouble code. this should point your mechanic in the right direction. if there is no code, then a check of the sensors, relays, and wiring in the system should identify the problem.
Can I drive with the throttle control warning light on?
It is not safe to drive with an electronic throttle control light. While you might be lucky and only have a drop in fuel efficiency or a slight drop in acceleration, the problem can quickly get worse if the sensor readings continue to go awry.
How much does it cost to fix electronic throttle control?
The average cost for throttle body replacement is between $489 and $600. Labor costs are estimated between $86 and $109 while parts are priced between $403 and $491. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
How much does it cost to fix throttle control?
The throttle body part will typically cost between $200 and $500, depending on the type of car that you drive. Labor costs for this kind of repair are typically relatively low, so you can expect to pay between $50 and $150 to have the part professionally installed.
How do I reset my Chrysler throttle body?
Fully depress the accelerator pedal for 10 seconds. At this point the check engine light should change to blinking slowly indicating “Erasing ECU Memory”. 8. Release the accelerator pedal and turn the ignition switch to off.
How do I reset my throttle position sensor?
This step can also be necessary when you install a new sensor. The easiest way to reset your throttle position sensor is to unhook the negative cable from your battery for up to five minutes or to remove the fuse for your engine control module.
How do I reset my electronic throttle control manually?
Resetting your electronic throttle control manually can be a tricky job. First, make sure the accelerator pedal is fully released. Next, turn the ignition on and then turn it off and wait for ten seconds. During these ten seconds, be sure the throttle valve is moving by listening for a sound of operation.
What can cause the electronic throttle control light to come on?
Some type of fault or malfunction in a sensor such as the throttle position sensor (located on the air control valve) can cause the electronic throttle control light to come on.
