The 5000 series (5004 = 4″) is the exact same thing as the 42SA, without the fancy label, however the advantage is that the 5004’s are not pre-loaded with a #3 nozzle, they come with a full 12 piece nozzle rack instead which makes it much more versatile.
How do you adjust Rainbird 3000 sprinkler heads?
To Increase Or Decrease The Arc:
While holding the nozzle turret at the fixed LEFT stop, insert tool or screwdriver into the adjustment socket. Next, adjust the arc with a screwdriver: Turn the screwdriver clockwise, (+) to INCREASE arc. Turn the screwdriver counterclockwise, (-) to DECREASE arc.
Can you adjust sprinkler heads?
Fortunately, adjusting a spray head is pretty simple, in most cases. At the top of most spray nozzles is a small screw that is used to adjust the head itself. Using a small screw driver, you’ll need to either tighten or loosen this adjustment screw to achieve your desired results.
How do you change the direction of a sprinkler head?
When you have the sprinkler going, use a flat-head screwdriver to rotate the adjustment screw found on the top of the nozzle. If you need to increase the width of the spray pattern, turn the screw counterclockwise. If you want to decrease it, turn the small screw clockwise.
How do you fix a Rainbird sprinkler head that won’t rotate?
How to Do It
Disassemble the sprinkler head. Take off the filter at the bottom of the head. Rinse the filter in a bucket filled with clean water to wash out debris.If this doesn’t work you’ll need to have the sprinkler head replaced. If it does work, make sure the head is properly adjusted when you re-install it.
Can I replace a Rainbird 5000 with a 42sa?
SO quick update: according to Rainbirds website: The Rotor 5000 are the same as Rotor 42sa, just “professional grade” instead of “homeowner grade”.
What is the difference between Rain Bird 5000 and 5000 plus?
5000 Plus PRS features a green cover while the 5000 PRS features a black cover. The 5000 Plus PRS features a Flow Shut-Off device to stop the flow of water to a particular head while the system is still in operation. Note: Pop-up height measured from cover to the nozzle. Overall body height is measured popped down.
How do you adjust a Rain Bird 3500 left stop?
Rain Bird 3500 Distance Adjustment
Turn the radius reduction screw counterclockwise to loosen the nozzle already in the rotor and then gently remove it using a flathead screwdriver or needle-nose pliers. To install the new nozzle, push it until you can feel it seat in place.
