This material is an excellent choice for a whole host of reasons. Most importantly, you can easily use rhinoLite on painted walls, brickwork, concrete block, and more.
Can I use RhinoLite on bathroom walls?
RhinoLite is not recommended for use in areas of high moisture, such as wet rooms, showers or exterior surfaces. As in good building practice, roof, windows and doors should be installed before plastering with RhinoLite, to help prevent dry-outs and ensure consistent setting.
Can you paint directly onto RhinoLite?
For Concrete/cement plaster/Asbestos/Fibre Cement/Rhinolite-plastered walls, apply one coat of Build It Water-based Plaster Primer followed by the desired topcoat. The plaster primer is important as it helps seal the plaster and is alkaline resistant which will help your paint to stick to the wall and not peel off.
How thick can you apply RhinoLite?
N.B. Gyproc RhinoLite Multipurpose Plaster should not be applied less than 3mm thick. Level it out with a Darby or straight edge.
How many squares does 40kg RhinoLite cover?
Drywall Plaster 40kg RHINOLITE (Covers 25m2 applied to a thickness of 3mm) | LEROY MERLIN South Africa.
How do you smooth RhinoLite?
Apply Rhinolite onto surface. Level it out with a darby or feathered edge straight edge. Leave until partially set. Only use enough water to lubricate the float.
Can you tile over RhinoLite walls?
RhinoLite tends to stick quite well onto drywall and also forms a barrier. It should also supply enough grip for tile glue to hang onto
What paint do you use on RhinoLite?
All RhinoLite surfaces must be sealed with an oil-based paint bonding liquid or a pigmented plaster primer, suitably thinned down with mineral turpentine. Allow to dry for 24 hours before applying two coats of acrylic paint.
Can you Colour RhinoLite?
Work as precisely as possible when mixing the oxide and RhinoLite and don’t mix too much at once because the RhinoLite hardens quickly – use a measuring cup. It’s a slow process to get the colour you want, so be patient. Apply the mixture with a metal trowel – about 2–3mm thick on a rough surface.
What is RhinoLite ceiling?
GYPROC Rhinolite is range of lightweight gypsum plasters, from base coat to finishing plasters. Manufactured for internal application onto a wide range of surfaces, there is a Gyproc Plaster for every application from traditional hand applied skim plastering to machine applied projection.
Can you tile over RhinoLite?
Just Remember: * Rhinolite doesn’t stick to paint. * You can’t tile a Rhinolited wall.
Can you mix bonding liquid with RhinoLite?
To ensure a proper bond between plaster and wall, for both products, an application of bonding liquid should be applied over previously painted surfaces. The Plascon Finishing Plaster is a ready-to-use paste, while RhinoLite on the other hand needs to be mixed according to the instructions.
Can you mix Rhinolite with cement?
RHINOLITE should not be used in areas where walls are washed with hosepipes, in showers or in industrial type kitchens. 1. Do not add any foreign matter (eg. cement) to RHINOLITE.
How many square meters does Rhinolite cover?
Drywall Plaster 10kg RHINOLITE ( Covers 6.25m2 applied to a thickness of 3mm)
