The most common reason your sprinklers are not watering is because the rain sensor is active. Do you have a rain sensor on your sprinkler system? If so, slide your sensor bypass switch into the “BYPASS” position (on an SRC, turn the dial into the RUN (Bypass Sensor position).
How do I reset my hunter X2 sprinkler?
X2 – Total Reset
Turn the dial to the RUN position. Press and hold the program button.Press and release the RESET button located inside the lower wiring compartment. When the display reads the controller station count; (e.g. 14) then DONE, release the PRG button.
How do you test a hunter sprinkler system?
To initiate the test program:
Press and hold the PRG button. The station number will be flashing.Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes. After a 2 second pause, the test program will begin.
How do I reset my sprinklers?
How to Reset a Sprinkler System
Turn the control dial to the “off” position.Press the “next” button to access the clear-memory feature. Press and hold the “off” button until the display stops blinking.Turn the control dial to the “run” position.Press and hold down the “minus” arrow and “prog” buttons simultaneously.
Is there an app for Hunter sprinkler system?
Hunter Hydrawise
Remote access is possible through either the Hydrawise app (iOS or Android compatible devices) or online through their cloud software. Key product features include: Predictive Watering Adjustments based on web-based weather data brings up to 50 percent in water savings.
