Verify the disc is inserted into the CD player properly. The disc may eject if inserted upside down. Press the RESET button on the front of the car stereo. Try a couple of different discs just to make sure there is not a problem with the disc that you are trying to play.
How do I reset my car CD player?
Hold the power and eject buttons simultaneously
Most car audio systems have a reset feature of sorts for their CD drive. Start by turning your car on, and then turning it off. With the car off, hold the stereo power button and the eject button simultaneously for at least 10 seconds.
How do you fix a car CD player error 1?
When an “Error 1” appears on the LCD screen of a CD player, the fact that the disc tray will not exit the chassis will explain the meaning behind the code. To fix an “Error 1,” lubricate a part of the CD player that controls how the tray functions.
How do I fix my CD player that won’t play?
If the problem persists with the new disc, remove all discs and run a power cycle to reset the player. Remove any batteries or unplug it to drain the power. Restart after one minute and try a fresh disc. After closing the tray, press lightly on the tray to ensure it closes properly.
What does disc error mean?
The message DISC ERR is usually displayed when the unit ca see the disc but not play the disc. This usually occurs when the disc is scratched or dirty. The message NO DiSC is displayed when the unit simply can not read or detect the disc at all. This can also occur if the disc is scratched or dirty.
What is CD player mecha error?
Mech Error – This indicates a mechanical error, often due to scratched, dirty or damaged discs. Changer Error – Eject the disc, inspect it, and reload it if it is undamaged and clean.
What is error 3 on car CD player?
Error code 3 means a mechanical error concerning the laser lens and around the lens, which can be fixed through troubleshooting.
Where is reset button on Toyota CD?
Press and hold the reset button on the front of the CD player. This button is often a small black indentation that must be pressed with a pen or a pin, and will reset the settings and force eject the disc.
How do I fix error 3 on CD changer?
You can try pulling the radio fuse for several minutes (or just disconnect the positive battery cable) and trying to see if it resets, but error 3 means the changer mechanism is jammed.
Can a car CD player be repaired?
Silence may seem less than golden when your car CD player suddenly stops working. But most of the time a car CD player can be repaired easily with minimal fuss and hassle.
How long should a CD player last?
CD players aren’t as long-lived, though they can deliver 5 to 10 years of service.
