Check the waste or backwash line for water consistently running. One inch of your pool water can equal 500 gallons. Check downhill from a pool, looking for weepers where underground leakage is surfacing. Check for soft or wet spots in the yard, on the side of the pool where the plumbing returns water to the pool.
How do you find a leak in an above ground pool with food coloring?
Add a couple drops of red food coloring. When the water quiets, place a drop or two of colored water into the pool. Start near the steps and work your way around the pool. Water follows the path of least resistance, so if there’s a leak, you will see the colored water leaving the pool as it flows out of the leak.
Where do most pool leaks occur?
Look closely at the filter, pump, heater, and pipe valves, which is where leaks often tend to occur. If you have a vinyl pool liner, look for tears or separations around the fittings, lights, steps, and corners.
Can you patch a pool with water in it?
Patching a pool with water in it is a fairly simple process, but keep in mind that a pool liner won’t last forever and multiple patches will increase your chances for continual pool leaks. If it’s time to repair or replace your vinyl pool liner give Aquaman Leak Detection a call.
