Top Load Washer – Lint / Pump Filters
There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator. During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.These filters should never require cleaning or replacement.
Do top loading washing machines have filters to clean?
Newer standard and high-efficiency washers, both front-loading and top-loading, promise to be self-cleaning and do not have a removable, cleanable lint filter. However, because they use much less water than an older washer, it is helpful to run a cleaning cycle every month to flush the lint away.
Where is the lint trap in a top load washer?
Top loading washing machines may have a lint trap with in the agitator. If the cover of the agitator is removable there very well could be a lint trap inside. Pull the cap off and look into the cylinder, if there is a handle, pull out and filter should be attached.
Where is the filter on a Whirlpool top load washer?
Usually, it will be on the bottom right of the washing machine, making access rather easy. Of course, your model may be different so you may need to consult the user’s manual or give your washer a quick look over to find it.
How do you clean the trap on a top load washing machine?
Here’s how to empty the lint trap in a washing machine:
If the screen is removable, soak it in hot water for 10 minutes to clear away residue.If the filter is secured in place, clean lint from it with a soft brush or paper towel.If the trap is disposable, replace it when it becomes clogged.
How do you clean a top loader washing machine?
Instructions
Empty the Washer. Select the Water Temperature and Cycle Settings. Fill the Washer With Water. Add the Chlorine Bleach. Run the Complete Washer Cycle. Clean Detergent and Fabric Softener Dispensers. Fill the Washer Again With Hot Water. Add Distilled White Vinegar.
How do you clean a GE top load washer without agitator?
Fill the washer with hot water; set at regular speed and the longest wash cycle. Add 3/4 cup of a water softening additive which can be found in the laundry detergent aisle (baking soda or vinegar can be substituted). Allow washer to complete entire wash and rinse cycle. If odor lingers, repeat entire process.
