#57 Granite Gravel—$56 per ton.
How much is a ton of 57 Stone cover?
Generally speaking, each ton of #57 stone can cover an area spanning approximately 60 square feet at a depth of 4 inches. At a depth of three inches, a ton of this material can cover roughly 80 square feet, while it can cover an area of 120 square feet when it is placed at a depth of 2 inches.
The cost of limestone will depend on the amount purchased, quality, type, if delivery is involved, geographical location and where it’s purchased from. On average, plan on spending anywhere from $10 to as much as $55 per ton. Ohio Mulch, for example, lists its prices online and charges $43.99 per ton.
How much is a truckload of 57 Rock?
One truckload of this rock is roughly equal to 10 to 12 cubic yards or 16 tons and may cost around $800, although prices can fluctuate.
57 granite is larger, which leaves larger spaces between the stone. Because of the size and shape of this gravel your tires can spin a little when driving through, but does provide excellent drainage for a driveway. This is a very popular option and looks really nice when spread.
What does 57 Gravel look like?
#57 Washed Gravel -(3/4″ to 1″)
This is a naturally occurring stone. The stones vary in color from gray to brown to tan and are rounded and smooth. It is not a crushed stone so it does not have any edges or corners. Sold by the ton, approximately 1.4 tons per cubic yard.
What does number 57 limestone look like?
Whitish-gray solid stone. Because it is crushed, it is not round stones, it has corners and edges. It is the type of stone typically used for driveways and parking lots. Slag and recycled concrete can be used for all the same applications as limestone.
Limestone & Travertine
Limestone or travertine pavers cost $13 to $30 per square foot to install.
Is limestone more expensive than brick?
If applying a limestone veneer to a cement block wall, the difference in cost is as little as $7 a square foot, however over the surface of an exterior wall, $7 a square foot adds up fast and should not be dismissed lightly.
Is limestone expensive to buy?
On average, limestone countertops cost around $70 minimum per square foot installed. Prices can go all the way up to around $200 per square foot installed depending on a variety of factors.
How much should a gravel driveway cost?
According to the Home Depot, 4 to 6 inches of rock or gravel is needed for a driveway. Convert your estimated rock depth in inches to feet by dividing the number of inches by 12.
Crush and run is one of the cheapest materials that can be used in a gravel driveway at about $0.40 per square foot. Cost per cubic yard is about $20 and per ton about $28.
How deep should my gravel driveway be?
Driveway Layers
A gravel drive should have a first layer of baseball-sized stones at least 4 inches deep. According to Tim Carter of AskTheBuilder.com, each layer thereafter should be 4 inches thick and in gradually smaller stone.
How many square feet will 5 tons of gravel cover?
Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.
