The 9-inch Ford Rearend is the Strongest Rearend Out There—It’s All Due to “Hypoid Distance” 1] The 9-inch Ford has no differential case gear-ratio range restrictions; one differential accepts all gear ratios from the 2s through the 6s.
What is the rarest Fox body?
Perhaps the most notable of all, though, is this foxy red 1993 Ford Mustang SVT Cobra R coupe, which sold for $132,000, making it the most expensive Fox-body Mustang ever sold at auction.
What year Mustangs have 8.8 rear end?
The 2005-2010 V8 Mustangs with 8.8” rear ends used 31 spline rear axles. For 2011-2014 Mustangs, both the V6 and 5.0L V8 Mustang were equipped with 31-spline axles. Here’s something to note… If you haven’t owned your mustang since it was new it may not be equipped with its original rear end from the factory!
What rear end do drag racers use?
Ford 9″- The Ford 9″ is definitely the most popular of the rear ends in drag racing. It offers good strength characteristics and the largest variety of gear choices. The thirdmember type center section allows a racer to have multiple gear ratios available and is much easier to change than a rear loading type rear end.
Is a Dana 70 better than a Dana 60?
The torque rating for a stock Dana 70 axle shaft is 8966 ft/lbs, which is almost 50% stronger than the stock Dana 60 axle shaft, which has a rating of 6044 ft/lbs.
Is a Dana 44 strong?
It used to be that the Dana 44 was considered to be a fairly stout axle. But as trails got tougher and tires got larger, the 44 got dumped in favor of even stronger hardware. But the Dana 44 is a pretty stout piece, and many companies offer parts to make your 44 even stronger than it now is.
How much is a Foxbody?
This model went through an impressive increase — from $5,831 in 2011 to $16,648 in 2021. In the past five years, average price ranges for Fox Bodies have grown from around $6,000 to $10,000 all the way up to $13,000 to $20,000. Currently, prices for good condition, rust-free Fox Bodies mirror those of brand new cars.
How much is a Fox Body Mustang?
The Hagerty Valuation Team has significant insight into Fox-body Mustang prices, but please check here for the latest values. It’s difficult to speak in generalities, as Fox Mustangs include over 100 vehicles with #2-condition (Excellent) values ranging from $7100 to $90,300.
What’s a notchback Mustang?
What Is a Notchback Mustang? Notchback Mustangs look much more like a traditional coupe. They have a standard trunk that opens into a closed cargo area. Notchbacks are often called coupes, and according to the official Ford literature of the time, they were also called sedans.
How much HP can a 8.8 rear end handle?
Dead stock (31 spline version, which is what the Explorer has) it can handle up to about 400 rwhp as long as you’re not on DR’s or Slicks. As soon as you go to those, you have to weld the tubes at a minimum.
What cars have a Ford 8.8 rear end?
Common Applications
1986-2014 Ford Mustang.1982-2012 Ford F-150.1982-1996 Ford Bronco.2001-2005 Ford Explorer Sport Trac.1991-2011 Ford Ranger 4.0L models.1991-2001 Ford Explorer (Solid axle)1985-2011 Ford Panther platform vehicles.2012–Present Ford F-150 (Super 8.8, depending on engine and other options)
How wide is a s10 rear end?
54-3/8″ wide from WMS-WMS (wheel mating surface) is what i’ve been told & the s10 4×4 are 60″.
How much HP can a 7.5 rear end handle?
7.5 rear end is a good one !! Up to around 400 HP if it was installed correctly !!
How do I know if I have 8.8 or 9.75 rear end?
On the passenger’s side upper and lower corners, there’s two semi-circular divots that can easily be seen when looking at the cover from straight on. While the Super 8.8’s cover has a bulge for the ring gear, it’s not anywhere near as pronounced as the 9.75’s.
How do I know if I have a 8.8 Mustang?
You can identify the Ford 8.8-inch rear by its rear cover. It has a thin metal or plastic 10-bolt cover, and the bolts are 7/16-inch thread. The cover is not quite square, measuring about 101/2 inches high by 11 inches long. The 8.8-inch pinion shaft is 15/8 inches and has 30 splines.
