The 2007 FJ Cruiser uses SAE 5w-30 viscosity, fully synthetic motor oil in its engine. The vehicle has an oil capacity of 5.5 US quarts.
What kind of oil does a 2008 FJ Cruiser take?
The 2008 Toyota FJ uses SAE 5w-30 viscosity, fully synthetic motor oil in itS3. 5 liter engine. The vehicle has an oil capacity of 6.2 US quarts.
What kind of oil does a 2011 FJ Cruiser take?
Engine Oil
0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change.
What is a Toyota FJ Cruiser?
The Toyota FJ Cruiser is a retro-styled mid-size SUV produced by Toyota since 2006.
How much oil does a 2010 FJ Cruiser take?
Fill your crankcase with your favorite brand of 0W-20 Synthetic motor oil. The manual says that the 2010 FJ Cruiser take 6.4 quarts when the filter is replace.
How do you check the transmission fluid on a Toyota FJ Cruiser?
How to Check the Transmission Fluid Level in an FJ Cruiser
Prop open the hood of the FJ Cruiser.Look for the transmission fluid dip stick, which is yellow and located below the master cylinder. Turn on the FJ Cruiser, and, while it’s running, reach for the dipstick and pull it out.
How do you reset the maintenance light on a Toyota FJ Cruiser?
How to Reset the Maintenance Light on a FJ Cruiser
Place the key in the ignition of the FJ Cruiser.Turn the key one click forward to the “ACC” or “Lock” position.Press the odometer reset button until the actual odometer reading is displayed.
How often should I change my oil FJ Cruiser?
Toyota recommends you change your FJ Cruiser’s oil and oil filter every 6 months or 5,000 miles (depending on vehicle year and oil type). In order to change your oil, you will need a flat space, a way to catch the old oil, enough new oil to fill it up, a new oil filter and an oil filter wrench to remove the old one.
