DRYLOK® Latex Concrete Floor Paint is an all-in-one paint and primer that is scientifically formulated to protect and decorate interior and exterior masonry floors. The attractive, flat, non-slip formula is effective on both new and previously painted surfaces.
Is Drylok floor paint waterproof?
DRYLOK® Floor & Wall Masonry Waterproofer stops water from coming up through the concrete floors. It is a waterproofer.
How long does Drylok concrete floor paint take to dry?
Allow 4 hours drying time and apply a second coat. Garage Floors and Exterior Concrete Surfaces: Thin the first coat with one pint of water per gallon of paint and apply by brush (a good quality nylon/polyester blend) to ensure good adhesion. Allow to dry 4 hours.
Is Drylock a good idea?
So, yes Drylok paint does really work. This is why it is such an excellent choice if you struggle with damp or water problems in your walls or floor. Just ensure that the surface is not wet when you apply the paint.
Does Drylok cause mold?
Yes, Drylok helps to prevent the development of mold and mildew because it is designed to prevent water from penetrating through foundation walls. The product provides an ‘inert coating’ which means it does not promote the growth of mold or mildew.
Does Drylok fill cracks?
DRYLOK® Pourable Masonry Crack Filler is formulated to fill and seal small cracks in concrete surfaces, sidewalks, walkways, steps, patios, garage floors, and more. It provides excellent adhesion, dries to the color of concrete and cleans up easily with soap and water.
How many coats of Drylok should I do?
APPLY TWO COATS. Allow to dry 2 hours between coats. The second and subsequent coats may be applied by roller, brush, or spray.
How much does a gallon of Drylok cover?
The key to a successful project is to remove all dirt, mold, moss, etc. then patch any holes or cracks with DRYLOK® Fast Plug and apply two coats of DRYLOK® Waterproofer to the surface at a spread rate of 100 square feet per gallon.
What is the difference between Drylok extreme and Drylok pro?
DRYLOK Pro offers mold and mildew resistance, stops water under hydrostatic pressure and water entering by wind driven rain. The warranty is the the greatest of any of our DRYLOK products. The color selection is more extensive than that of DRYLOK Extreme. DRYLOK Pro was formulated to accept a larger spectrum of color.
Do you need 2 coats of Drylok?
Just as with a thorough paint job, proper application of DRYLOK Masonry Waterproofer requires two coats. Dry times vary based on temperature and humidity, but it typically takes at least four hours for the product to dry.
Can you apply Drylok with a roller?
Stir DRYLOK® Extreme Masonry Waterproofer thoroughly before and during application — do not thin. Apply the first coat to bare masonry with a three-quarter-inch nap roller, a DRYLOK® Brush or a quality nylon bristle brush.
