The machine is delivered with transit bolts fitted in the back of the machine. These must be removed before you use the appliance, failure to remove them will make the machine very noisy and lead to damage to the product.
Does my Samsung dryer have shipping bolts?
Your Samsung Front Load Washing Machine comes with shipping bolts inserted into the back of the machine to keep the tub secure during transportation. Suspension system of machine supports the wash tub while it tumbles and spins . Operating machine with locked tub (by shipping bolts) may damage internal parts.
What happens if I use my washing machine without removing the transit bolts?
Potential Damage. If you do not remove the transit bolts correctly you risk damage to your washing machine, in some cases this can be considerable, to the point where you can comprehensively wreck your shiny new washing machine.
Do all new washing machines have transit bolts?
Normally when you get your new washing machine there will be two (rare), three or four transit bolts fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine. These bolts “lock” the drum unit in place stopping it from moving.
Why do washing machines have transit bolts?
A transit bolt, also called a washer shipping bolt, is installed through the back a washing machine to keep the tub from moving around during shipping.
Do top load washing machines have transit bolts?
Top-loaders usually require you to wedge foam or cardboard between the drum and the case. For a front-loader, you’ll typically insert shipping bolts in the rear of the washer to secure the drum. If you no longer have the original locks, contact the manufacturer to purchase some.
What size are Samsung shipping bolts?
The dimensions of the shipping bolt is approximately, 6 1/8 inches long by 1 inch wide and it is 9 TPI.
Will shipping bolts damage washer?
Warning: Failure to remove the shipping bolts and retainers before use may cause severe vibration and noise, which can lead to permanent damage to the washer. The second possible cause of excessive vibration is a shipping block that might be caught under the washer.
Do new dryers have shipping bolts?
Answer Ryan, typically there are no shipping bolts used in the transportation of the dryer. There will be some Styrofoam used but it is not really necessary and it would not be available for purchase.
Do front load dryers have shipping bolts?
Only a front load washer would have shipping bolts. Beside above, do tumble dryers have transit bolts? Some tumble dryer models have “automatic” transit bolts on the drum. When you start the appliance for the first time you will hear a bump indicating that the transit bolts have been released.
Can I lay my washing machine on its side?
It’s recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension. It can also cause the tubs to move out of alignment and alter the way your unit works.
How many transit bolts does a Beko washing machine have?
When your new Beko washing machine is delivered it will have up to five transit bolts attached to the back of the machine which keep the machine secure while it is in transit.
