A broken-out section is part of an existing drawing view, that is used to remove material to a specified depth in order to expose inner details of a model. A closed profile, usually a spline, defines the broken-out section.
How do you draw a broken-out section?
To create a broken-out section:
Click Broken-out Section. (Drawing toolbar), or click Insert > Drawing View > Broken-out Section. Sketch a profile.Set options in the Section View dialog box. Set options in the Broken-out Section PropertyManager. Click .
What is Breakview?
You can use a break (or interrupted) view in a drawing. Break views make it possible to display the drawing view in a larger scale on a smaller size drawing sheet. You create a gap or break in the view using a pair of break lines.
What is a removed section view?
The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.
What is full section?
Full Sections
When a cutting plane line passes entirely through an object, the resulting section is called a full section Fig. 7 illustrates a full section. It is possible to section an object whenever a closer look intentionally is desired. Here is an object sectioned from two different directions.
What is the purpose of section lining?
Section Lines: Used to indicate where the cutting plane cuts the material. Section lines are thin and the symbols (type of lines) are chosen according to the material of the object.
Why is it the material is removed in broken-out section?
Material is removed to a specified depth to expose inner details. Specify the depth by setting a number or by selecting geometry in a drawing view. If you create a broken-out section of an exploded view, you cannot collapse the exploded view.
How do I change a broken-out part in Solid Edge?
Use 3D drawing view mode to select an obscured edge for the depth of a broken-out section view. To delete or edit a broken-out section: Right-click the broken-out section in the FeatureManager design tree and select one of the following. Delete.
How do you delete a broken-out view in Solid Edge?
Select the broken-out section view profile to edit the broken-out section view. You can use the options on the Broken-Out Profile Selection command bar to modify the profile or extent depth of the broken-out section view. Select the broken-out section view profile to delete it using the Delete key.
How do you hide a line break in Solidworks?
First you right click the view and choose un-break view in the menu. You can then remove break lines by marking them and pressing Delete or move them as requiered.
How do you break an isometric view in Solidworks?
Model Break Views Within Drawings
In the Drawing View PropertyManager, under Reference Configuration, select Show in exploded or model break state.Right-click the drawing view and click Properties. In the dialog box, in Configuration information, select Show in exploded or model break state, and click OK.
How do you align break View in Solidworks?
Breaking a View’s Alignment
Right-click inside the view boundary.Select Alignment > Break Alignment, or click Tools > Align Drawing View > Break Alignment. To break a view’s alignment while placing the view, press Ctrl as you place the view.
What are the 7 types of section views?
There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.
What is revolved and removed section?
This section in a plane that is perpendicular to the plane of axis, is then revolved and brought in to the plane of the axis and placed in the view in which the axis is seen as a line. This section shown by a thin continuous line is known as revolved section. (Fig.4.2.Revolved section) Removed section.
What is offset section?
An offset section view is generated by offsetting (bending) the cutting plane to show features that are not in a straight line.
What are the types of section?
6 Types of sectional views
Full sections. Half sections or views. Offset sections or views. Broken out sections or broken views. Revolving sections or view. Removed sections.
What is a section plan?
Plan drawings are in fact a type of section, but they cut through the building on a horizontal rather than vertical plane. The direction of the plane through which the section is cut is often represented on plan drawings and elevations by a line of long and short dashes, called a section plane.
When should a full section be used?
Full sections
This type of section is used for both detail and assembly drawings. When the cutting plane divides the object into two identical parts, it is not necessary to indicate its location.
