Handset Unlock
Press and hold the “M” button (about 5 seconds) until the LED display switches from “LOC” to the height number. 2. Release the button. The handset is now unlocked and fully functional.
How do I reset my electric desk?
Unplug your desk from the outlet and wait 30 seconds. Then plug your desk back in. You should hear a few clicks. Press and hold the down button of your desk until the desk reaches its lowest point.
How do you fix a standing desk that won’t go up?
How to Reset a Standing Desk
Remove anything from under the desk that may obstruct travel.Unplug the desk from the power outlet and wait 30 seconds.Check all other cords for the desk’s motor or control box and make sure they’re secure.Plug the power cord into the wall socket.
How do I reset my poppin desk?
Press and hold the DOWN arrow key again, while the desk lowers and rises slightly. Release the key. The display readout will revert to the desk height.
How do I reset my uplift?
Quick Reset Instructions
Hold the DOWN button until the desk reaches its lowest height and then release the button (for the Advanced Paddle Keypad, hold the paddle down). Pro tip: If your desk doesn’t start to move after pressing the DOWN button, release the DOWN button and try again.
How do I reset my autonomous standing desk?
Reset Steps:
Unplug the desk for 20 seconds. Plug it back in. Wait a full 20 seconds.Press the up and down buttons until the desk lowers all the way and beeps or 20 seconds pass.Release both buttons.Press the down buttons until the desk beeps one more time or 20 seconds pass.
How do you unlock the Poppin desk?
1. Press the M button for 5 seconds, until the LED display reads 2. To unlock the Handset, press the M button for 5 seconds, until the LED display shows the desk height. CAUTION: If the Control Box power supply is interrupted, then the handset will default to the unlocked mode.
How do I unlock my uplift desk?
To unlock: Press and hold “M” button until display changes to numeric height setting. NOTE: If a power outage occurs, the program will automatically return to the unlocked setting. Save up to four commonly used desk heights and recall them quickly.
How do I calibrate my uplift desk?
How to calibrate the height display on your desk:
Press and hold the “down” button until the display flashes “RST”; then push the “M” button until the numeric display begins flashing.Press the “up” or “down” button to adjust the displayed height to match your desk’s measured height.
