Standard lengths are 10′, 12′ and 14′. Other lengths available upon request. Conventional metal studs are available in 25, 22, 20, 18, and 16 gauge steel for your convenience (1-5/8″ available in 20, 22 and 25 gauge only).
How wide is a standard metal stud?
Flange Sizes: 1-3/8”, 1-5/8”, 2”, 2-1/2”, 3”. Thickness: 33 mils (20ga), 43 mils (18ga), 54 mils (16ga), 68 mils (14ga) and 97 mils (12ga). 33mil (20ga) and 43mil (18ga) framing products are produced with 33ksi steel.
How are metal studs measured?
Determine how far apart the steel studs will be located and divide the linear feet of the perimeter by that number. Steel studs are typically located 16 inches apart so divide the perimeter in inches by 16. If the perimeter is 60 feet, or 720 inches, then 45 steel studs will be needed.
What are the actual dimensions of a 2×4 metal stud?
A 2×4, for example, is really 3-1/2″ x 1-1/2″. Metal framing on the other hand, is referenced by actual size. As a result you will get exactly what you order. If you request a 3-5/8″ steel stud, you will receive a full 3-5/8″ width.
Are 6 metal studs actually 6?
For Wall Framing
A 600S metal stud measures 6 inches on its web, or long face. Thus a metal stud taking the place of a two-by-four measures 1 5/8 by 4 inches, and a two-by-six, 1 5/8 by 6 inches — slightly fatter but the same depth as their wood equivalents.
What is the spacing for metal studs?
Framing. Just like wood framing, metal studs should be spaced 16 or 24 inches apart. This allows for the installation of wallboard and other wall sheet products that come in standard sizes. After installing the floor and ceiling tracks, each metal stud is measured, and the length is cut to fit.
What size steel stud should I use?
Most load-bearing walls require 16 or 18-gauge studs and interior walls are built using 20 or 25-gauge metal studs.
What size is a wall stud?
Two-by-six and two-by-four are the most common dimensions of wall studs. Standard walls of 8 feet have wall studs that are 92 inches. The studs are 104 1/2 inches in homes with 9-foot walls.
How thick is a 6 metal stud?
This tells you the stud is 6 inches wide with a 1-5/8 inch (1.62 inch) flange and is 16-ga (54 mils) thick.
Are metal studs better than wood studs?
Metal studs are also healthier than wood studs because metal does not emit VOCs. Wood has several advantages over metal studs. Wood studs are less expensive and more available than metal studs. Wood studs are also easier and safer to cut, maintain, and repair, over metal studs.
How thick is a metal stud wall?
Metal Stud Sizes
The most common size stud is a 3 5/8″ wide stud. Combined with a layer of 5/8″ gypsum wall board on both sides will give a 4 7/8″ thick wall.
