As boat length increases the weight capacity similarly increase, so with a 12 foot boat approximately 400 lbs can be safely contained and at 14 foot 400+ lbs. At 16 foot in length a Jon boat can usually hold about 1,000 lbs. An 18 foot Jon boat will hold, on average, about 1,500 lbs.
How heavy is a 10 ft aluminum boat?
10-foot aluminum Jon boats have an average dry hull weight of 95 pounds or 43 kgs. This average was calculated and based on the following models and manufactures.
What is the max HP for a 12 foot aluminum boat?
Maximum Horsepower
For example, a twelve-foot boat with a four-foot transom width translates into a maximum engine size of fifteen horsepower.
How wide is the average 12 foot aluminum boat?
How wide is a 12-foot Jon boat? Around 48 to 60 inches on average.
How heavy is a 14 foot aluminum boat?
You can find some v-hull designs that are in the 150-pound range, which are reasonably easy to move around. But flat-bottomed jon boats tend to weigh more. Add in under-floor storage and a wider design and weights approaching 300 pounds are possible.
How heavy is an aluminum boat?
The weight of an aluminum fishing boat largely depends on the size of the engine. With a small motor, an aluminum fishing boat can weigh as little as 650 pounds. With a bigger, more powerful motor, they can weigh approximately 900 pounds.
What size motor can you put on a 14 foot jon boat?
For example, you can easily find that one particular 14′ foot Jon boat can take a 20 hp outboard motor while a different 14′ model can only handle a 15 hp, even though they are both made by the same manufacturer!
What is a 1448 jon boat?
Overview. The all-purpose, all-welded TRACKER® GRIZZLY® 1448 Jon is a tough, nimble and affordable aluminum jon boat. The deep, roomy interior leaves plenty of room for fishing tackle or duck decoys, and 2 seat bases accept a variety of seating options. GRIZZLY jon boats have a thick, .
What is a 1436 jon boat?
A 1436 Jon boat is a flat bottom, shallow draft watercraft used almost entirely on inland bodies of water. The 1436 number in the name refers to the length of the boat and the width of its bottom. A 1436 Jon boat is 14 foot long and has a bottom that is 36″ wide.
How fast will a 9.9 hp outboard go?
Assuming this is a light 14′ utility boat and a standard 9.9, Mercury would recommend a 8.5 to 9.5 pitch prop for the OP’s application and predicts a top speed around 20 mph. In my experience with similar craft and outboards, this sounds very reasonable.
How do you increase the weight on a jon boat?
Ways to Add Buoyancy to a Jon Boat
Add flotation pods. Move some of the heavier items to the front. Add PVC tubes. Built-in air cavities for buoyancy. Adding buoyancy using foam.
Can you put a long shaft outboard on a jon boat?
A long shaft will definately work. Wawasee has a jon boat and motor that his grandfather give him that was a low transom boat and (Monarch mod vee??) and an old 20 hp Mercury. I rode in the boat a few times and it actually worked okay.
How much does a 12 ft V bottom boat weigh?
A typical 12-foot aluminum boat weighs about 200 pounds. This type of craft is used as a rowboat, or a motor is attached for additional power.
How much does a 12 foot Tinnie weigh?
Currently, there are no real 12-footers available and most are 3.75m with a greater beam and depth. For example, in the ’80s the car-toppable 3.66m Clark Clipper weighed 57kg but now even a ‘lightweight’ 12ft dinghy such as Horizon’s 3.75 Dinghy has a 1.65m beam, weighs 85kg and is rated to 25hp.
How much does an aluminum row boat weigh?
Smaller aluminum fishing boats typically weigh around 400 pounds and a 14 feet cabin cruisers will often weigh around 14,000 pounds. A superyacht can weigh up to 100,000 pounds.
