Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights. This larger saw can cut a maximum thickness of 3 1/2 inches, enough to cut through four-by-fours.
Can a 12-inch miter saw cut a 6×6?
The geometry that makes it a wide, flat cutter works against it with a taller block. No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6. The capacities in the specs (page 36) are based on the widest and thickest pieces that could be cut laying flat.
How wide of a piece of wood can a sliding miter saw cut?
Sliding compound-miter saws will work just like chop saws, but because their blades move back and forth on horizontal rails, they also can slice stock up to 15 inches wide in one stroke.
Will a 12-inch miter saw cut through a 4×4?
A 12” miter saw clearly has a bigger blade. This means that it can do longer cuts faster as well as wider cuts. The cutting capacity is so superior that even the cheapest 12” miter saws on the market will still cut through 4x4s faster and cleaner than the best sliding 10” miter saw.
Can you cut a 2×12 with a miter saw?
The biggest drawback of a miter saw is that the smaller (and cheaper) sizes can’t cut completely through wide material, such as 2×10 or 2×12 boards, in one pass. Well, a sliding miter saw can make these cuts, but you’ll spend twice as much for one.
Can a 12 inch miter saw cut a 4×6?
Yes! A 12” miter saw can easily cut a 4 x 6 lumber. A 12 inch miter saw clearly has a bigger blade and has the capability to cut 4×6 lumber in a single pass.
Can you put a 12-inch blade on a 10-inch table saw?
The Blade Runner
Twelve-inch blades are harder to find, and at a higher price typically at woodworking supply retailers. Theoretically, a 10-inch blade will fit on a 12-inch table saw, but the arbor — or hole in the middle of the blade — is typically smaller.
What is the largest compound miter saw?
12-inch miter saw: The largest size used by DIYers and most builders, a 12-inch miter saw will make a 90-degree cut on a 2×8 and a 45-degree cut on a 2×6.
How big of a board can a 10 sliding miter saw cut?
Saws start to differ when you look at their blade diameter—commonly 10 inches or 12 inches. The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
What is the advantage of a sliding miter saw?
They can quickly create bevels at any angle. Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.
What size saw do I need to cut a 4×4?
The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.
Can you put a 10 blade on a 12 miter saw?
You can put your 10-inch blades on your 12-inch saw (assuming the arbor holes are the same size), but you cannot put 12-inch blades on a 10-inch saw. The 12-inch saw gives you greater versatility – with the larger blade, it’s the hefty workhorse, and with the smaller blade, it’s a master of precision.
Can I use a miter saw on the ground?
A miter saw can be used on the floor, but it may be challenging to hold the board you are cutting level and in place. You can always buy or build a miter saw stand so you won’t have a hard time to work with your miter saw on the floor.
